2 Dog Wireless Electric In-Ground Fence Containment System Shock Training Collar

2 Dog Wireless Electric In-Ground/Underground Fence Containment System with Shock/Beep Training Collars
T2529

* Safe Efficient Dog Fencing System: Come with buried wires and wall-mounted transmitter, help to train dogs to shape the habit of living in their own independent space, and keep your furniture and daily necessities clean and tidy, especially keep your pets away from the uneasy of living in a real fence. Make sure your dog stay in the specified and safe area, you will never have to worry about anything when you go outside. It can be widely used for dog training at home or field trip.

* Automatic Dog Training: The collar works automatically once you install the system. It will send beep and shock as your dog try to cross the boundary wire. The closer your dog goes, the more intense the shock will be, effectively train him back to the play area you set.

* Adjustable Control Range: The electric fence allows you to control the width of the boundary by adjusting the knob. Customizable range up to 1.2 acres/53189Square FT. The wire break warning can tell you in time if the wire is broken.

* Multiple Dogs Support: Fits all kinds of dogs weighing 4lbs+ with neck sizes from 7.5in To 17.92in. One transmitter can pair with 3 collar receivers. Note: Our package only contains dual receiver collars.

* Stable Mount: This do-it-yourself weekend project lets you create an in-ground fence designed to fit your yard. Suggestion: Use it only under the supervision of dog’ owner. Do not let the collar receiver over your pet for more than 12 hours a day.

ELECTRIC DOG FENCE SYSTEM PET TONE SHOCK BOUNDARY CONTAINMENT WATER RESISTANT COLLAR RECEIVER FOR SMALL MEDIUM LARGE DOG

OUR ELECTRIC DOG FENCE SYSTEM IS A RELIABLE, COST-EFFICIENT PET CONTAINMENT SYSTEM. A BURIED WIRE TRANSMITS A HARMLESS RADIO SIGNAL.

When your dog approaches the boundary, the signal causes the dog’s collar receiver to deliver a warning beep first.

.

Note:

*Only use it for dog, not any other animals.

*Let your dog adapt to the collar before you start training. You should allow your dog to accept the collar as a part of her life.

*When the collar in your dog, do not set the program.

*Keep away from children can touch the place.

* Please read all instructions before using this product.

KEEP SAFE IN LIMITED SPACE.

YOUR DOG WILL NATURALLY SEEK TO AVOID CORRECTION, AND IS CONTENT STAYING WITHIN ESTABLISHED BOUNDARIES.

If your dog continues closer to the boundary, the system will issue a mild shock. If your dog continues further, the system will issue stronger shocks until your dog returns to within the boundary you have set up

ELECTRIC DOG FENCE SYSTEM MATERIALS: ABS

RUN TIME: ABOUT 10 DAYS

Adjustable Control Range: Up To 5000 Square Meters/53189Square FT/1.2Acre

Pet Collar Fits Dogs 4lbs+ with Neck Sizes From 7.5in To 17.92in

Bury Wire Cable Length: 300m/984FT

Suggested Wire Bury Depth: More Than 1in Underground

PACKAGE CONTENTS

* 1x Indoor Wall-mounted Transmitter
* 2x Adjustable Receiver Collars w/Neck Straps
* 1x Power Adapter w/ Charging Cable
* 1 Coil x Boundary Wire
* 20 x Training Flags
* 2x Test Bulbs;1Bag x Screw
* 2Pairs x Extra Metal Contact Points

IT WILL BE BETTER TO BURY ONLY 1-3INCHES.

How It Works:

1) Wall-mounted transmitter: Transmitter is the central controller to whole electronic system. Make sure the wire is set to a loop.

2) The receiver collar: Receiver (collar)will make a warning beep firstly and then continuous stimulation if your dog attempts to approach wire boundary.

3) How to install the system

*Design your containment area and calculatethe amount of wire needed.

*Install the wall transmitter.

*Lay out the perimeter wire.

*Connect the perimeter wire to the wall transmitter.

*Verify transmitter is functioning without problem.

*Set up the receiver and then, test the containment system and adjust the field width.

*Install the boundary wire and training flags.

*Fit collars to your dogs and train your dogs.

USE ADVICE: PLEASE DO NOT LET YOUR DOG USE THE RECEIVER FOR A LONG TIME. (RECOMMENDED NO MORE THAN 8 HOURS)

Launch Notes:

1. The rotary switch maintains the maximum output and ensures that the transmitter can work normally.

2. The transmitter does not support 12V voltage, and does not support rain/exposure.

3. Before clipping the wire, remove the end of the wire to leak out the wire core, then clip it on the transmitter, and emit two green lights to prove that it is working.

4. The premise of burying the line must ensure that the line (left of line A) (right of line B) cannot be knotted, otherwise the signal will be affected.

Receiving Notes:

1. The receiver does not support soaking in water.

2. Pay attention to identify the positive and negative poles during installation, and do not install them in reverse.

*** New, Unused Open Box Item. We provide stock pictures for reference and more detailed information from the manufacturer, when available. We also ALWAYS provide actual item pictures so make sure to scroll them them all to see exactly what you will receive. ***

*** EVERY item has individual pictures taken and descriptions written and both are checked and rechecked to ensure you are being shipped the correct item and that the item was pictured and described correctly. However, I am sure I will make a mistake at times...in that case please just email me and I will make the situation right!!! I truly value your Feedback and 5 Star Ratings!!!

Thank you for your business!!!! Come back anytime as we list new items several times a week!!!